• info@pilonengineering.com
  • sales@pilonengineering.com
  • Support@pilonengineering.com
Menu
  • info@pilonengineering.com
  • sales@pilonengineering.com
  • support@pilonengineering.com
Menu

Lab Equipment Division

Pilon has setup up a Lab Equipment division in collaboration with various OEMs (Original Equipment Manufacturers) around the globe to suffice growing needs of laboratories & industries. This division helps you with all your requirements to carry out your processes needless to contact various manufacturers for your varying needs. Here we act as one point contact for all your needs.

This division keeps track of all the research & industrial requirements like supply of and any other requirement.

Bench Top Reactors for Catalyst Testing: Micro level / Lab level / Pilot Level:

  1. Micro Gas Reactors: Liquid Micro Reactors / Gride Micro Reactors / Micro level / Lab level
  2. High Pressure Fixed Bed Reactor Systems : Fixed bed Micro Reactor / VLE Setup/ Vapour Phase Reactor / Biodiesel Reactor / Mini Reactor Systems / Hydrotreaters / Hydrocrackers / Reformers / GTL systems / FT Unit / Vapour Phase Reactor / Pressure Swing Adsorption Systems / Bench Top Reactor Systems
  3. Stirred Reactors : Laboratory Autoclaves/ CSTR’s/ Batch Reactors/ Solvent Screening System/ Pressure Vessels / Corrosion Autoclaves: 25 ml to 4 litre (custom designed up to 100 litre), Press: 400 bar, Temp.: 510 ºC, Gas/Liquid, Gas/Liquid/ Solid, Gas/ Liquid/Solid/ Vapour, Gas/Gas, Liquid/Liquid, Catalyst Basket, Material of Construction: SS 316 / HC276 / Glass / Inconel / Titanium / Teflon Lined
  4. High-Temperature Heating Tapes
  5. Pressure Regulators (forward & back pressure)
  6. Mass Flow Controllers:  Pressure range 0.5 bars to 400 bar, Flow Range ability 1: 50 ratios, all gases.
  7. Pressure Gauges & Pressure Transmitters: Ranges: 1 bar to 400 bar, vacuum gages: up to 760 mm hg
  8. Thermocouples
  9. Control Instrumentation: Programmable Temperature Controllers, RPM Indicators, SCR regulators, power controllers etc.
  10. Liquid Metering Pumps: Pressure 750/1500/2500/6000 psig, Flow (ml/min): 0.002-2.5 / 0.003-5.0 / 0.02- 40 / 0.04 – 80.0 / 0.01-9.90 / 0.1-39.9 with PC interface & RS 232 communication.
  11. Laboratory Tubular Split Furnaces Single zone to five zone & temp 900 °C / 1200 °C, ¼” ID to 2” ID
  12. Valves, Fittings & Tubing Swagelok, Parker & Autoclave range
    Circulators & Cryostat
  13. Tubular Reactor Tubes: 5cc to 500 cc, SS316 / HC276 / Inconel, Pressure 50 bar / 100 bar / 400 bar, Temp: up to 900 °C, available in all lengths & diameters along with high pressure metal to metal seal, thermowell ¼” or 1/8”
  14. Special Valves Multiport Stream Selection Valve, Sampling Valve, 2/3-way Ball Valve 260 °C /300 bar
  15. Chromatography Products GS MSD, GC Columns/Accessories, HPLC Pumps, HPLC Gradient Systems
  16. Process Analyser Surface Area Analysers for Powders / Particle Size Analysers / Automatic Distillation Analyser – D86 Automation & Services
lab-equipment-division2
lab-equipment-division1 (1)
lab-equipment-division4
lab-equipment-division3
lab-equipment-division5
  1. Pilon Engineering Pvt Ltd offers high-grade systems for chemical storage and metering solutions across a comprehensive range of liquids, powders, slurries, emulsions, Phosphate, Ammonia, hydrazine, morpholine, NaOH etc..
  2. These systems have applications that include acid handling, wastewater treatment and cooling water dosing.
  3. Initial site visits for survey of the requirement and working from concept to commissioning, Pilon Engineering designs and manufactures dosing systems as demanded.
  4. Depending upon high pressure operating parameters like service, process fluid, operating pressure, operating temperature etc. system will be designed and accordingly equipment’s and instruments will be selected
  5. Equipment’s like pressure vessels/ autoclaves/ process equipment etc. are designed and manufactured keeping various international standards in mind like PED/ ASME/ CE etc. where ever required.
  6. System integration based on computer based PLC SCADA can be done considering appropriate reputed makes of piping/tubing, valves, pressure/ temperature gauges/ indicators/ controller etc., thermocouples, furnaces, gas/liquid flow controllers, sensors, panels, SCADA software’s etc. are procured and assembled in-house.
  7. MOC available Stainless steel, Inconel, Hastalloy, Incolloy (800, 800H and 800HT, Monel, Titanium etc.)
  8. Get in touch with our team to work closely on your requirements and get your system integration done in a precise manner.
  1. Pilon Engineering Pvt Ltd offers high-grade systems for chemical storage and metering solutions across a comprehensive range of liquids, powders, slurries, emulsions, Phosphate, Ammonia, hydrazine, morpholine, NaOH etc..
  2. These systems have applications that include acid handling, wastewater treatment and cooling water dosing.
  3. Initial site visits for survey of the requirement and working from concept to commissioning, Pilon Engineering designs and manufactures dosing systems as demanded.
  4. Depending upon low pressure operating parameters like service, process fluid, operating pressure, operating temperature etc. system will be designed and accordingly equipment’s and instruments will be selected
  5. Equipment’s like pressure vessels/ autoclaves/ process equipment etc. are designed and manufactured keeping various international standards in mind like PED/ ASME/ CE etc. where ever required.
  6. System integration based on computer based PLC SCADA can be done considering appropriate reputed makes of piping/tubing, valves, pressure/ temperature gauges/ indicators/ controller etc., thermocouples, furnaces, gas/liquid flow controllers, sensors, panels, SCADA software’s etc. are procured and assembled in-house.
  7. MOC available Stainless steel, Inconel, Hastalloy, Incolloy (800, 800H and 800HT, Monel, Titanium etc.)
  8. Get in touch with our team to work closely on your requirements and get your system integration done in a precise manner.
  1. Pilon Engineering Pvt Ltd offers high-grade Gas Dosing systems for Hydrogen, Oxygen, Nitrogen etc.
  2. Initial site visits for survey of the requirement and working from concept to commissioning, Pilon Engineering designs and manufactures Gas dosing systems as demanded.
  3. Depending upon operating parameters like service, process fluid, operating pressure, operating temperature etc. system will be designed and accordingly equipments and instruments will be selected
  4. Gas Cylinders along with Accessories such as Bull Nose, Hose pipe, Cylinder regulator etc.
  5. High pressure regulator for reduction of pressure
  6. Isolation Valves such as Ball, NRV etc.
  7. Tubing and Fittings according to pressure rating.
  8. Solenoid valves, Injection assembly. etc.
  9. Instrumentation and Control such as, Pressure Gauge, Switch, Transmitter, Flow meter, Switch, Transmitter etc. as per process requirements
  10. Control Panel, Junction Box for termination for Instruments.
  11. Cabling and Wiring required for connection.
  12. Skid Structure for mounting.
  13. MOC available Stainless steel, Inconel, Hastalloy, Incolloy (800, 800H and 800HT, Monel, Titanium etc.)
  14. Get in touch with our team to work closely on your requirements and get your system integration done in a precise manner.

QUICK CONTACT

Office Address:

Plot No : 513/2/1, J Block, MIDC. Bhosari, Pune- 411026

Factory Address:

UNIT- 1 : Plot No : 513/2/1, J Block, MIDC. Bhosari, Pune- 411026

Facebook Twitter Linkedin

INDUSTRIES SERVED

PRODUCTS

SERVICES

Copyright © 2022 Pilon Engineering Pvt. Ltd. All rights reserved. | Powerd By Nia Webbrand.

Primary Responsibilities :
  1. 1.Making Drawing for Pressure Vessel, column, Heat Exchanger etc.
  2. 2.Making Dosing System Drawing as per client P &ID.
  3. 3.Having Experience in EPC Project
  4. 4.Designing of Manufacturing components, Assembly, GA drawing and assembly of project
Key Result Areas :
  1. 1.Work with multiple discipline projects
  2. 2.Managing and monitoring all assigned Projects
  3. 3.Site Engineering, Project Management
  4. 4.Documents Management
  5. 5.Subordinate and Senior Relations
  6. 6.Work within Time and Accuracy (No any complaints)
  7. 7.Discipline on Office (Proper Dress up, Appearance, Duty Timings, Communication)
Reporting to : Respective Line Manager
Primary Responsibilities :
  1. Preparation of Project Planning & Scheduling, Attending project Kick off meetings.
  2. One point contact to customer.
  3. Act as main coordination between Customer, Factory, and Supplier.
  4. Monitor the overall progress of projects against schedule and reporting to management.
  5. Maintain detailed project files and applicable records.
  6. coordinate the assigned project work during all project phases
  7. Manage budget, procurement and schedules for various projects.
  8. Provide approved documents along with manufacturing schedule based on the Commercial situation, inventory & time frame to the factory & supplier.
  9. Follow-up with supplier & factory for manufacturing status.
  10. Provide the project progress status to customer & management.
  11. Coordination of the inspection activity with factory, supplier, customer & TPI as per customer requirements
Key Result Areas :
  1. Work with multiple discipline projects
  2. Managing and monitoring all assigned Projects
  3. Site Engineering, Project Management
  4. Documents Management
  5. Subordinate and Senior Relations
  6. Work within Time and Accuracy (No any  complaints)
  7. Discipline on Office (Proper Dress-up, Appearance, Duty Timings, Communication)
Reporting to : Respective Line Manager
  • Having experience in EPC projects.
  • Having knowledge of exposure to pressure vessels, various types of process equipment, skid mounted systems is must.
  • Hould be able to prepare GA Drawings, Detailed fabrication drawings to support manufacturing .
  • Assembly of Shell & Tube Heat Exchangers, reactors, pressure vessels, skid, piping/ tubing etc
  • Should have experience of Preparation of Pipeline drawing – PFD / PID
  • Preparation of GAD/ layouts for projects.
  • Having experience in EPC projects.
  • Having knowledge of exposure to pressure vessels, various types of process equipment, skid mounted systems is must.
  • hould be able to prepare GA Drawings, Detailed fabrication drawings to support manufacturing .
  • Assembly of Shell & Tube Heat Exchangers, reactors, pressure vessels, skid, piping/ tubing etc
  • Should have experience of Preparation of Pipeline drawing – PFD / PID
  • Preparation of GAD/ layouts for projects.
  • Conducting product research and sourcing new suppliers and vendors.
  • Sourcing materials, goods, products, and services and negotiating the best or most cost-effective contracts and deals.
  • Performing inventory inspections and reordering supplies and stock as necessary.
  • Conducting market research to keep abreast of emerging trends and business opportunities.
  • Updating and maintaining records of all orders, payments, and received stock.
  • Excellent networking and time management skills.