• info@pilonengineering.com
  • sales@pilonengineering.com
  • Support@pilonengineering.com
Menu
  • info@pilonengineering.com
  • sales@pilonengineering.com
  • support@pilonengineering.com
Menu

Reaction Vessel Jacketed / Limpet Coil

ddsd
reactor-with-limpet-coil1

Limpet coil reactor vessels are used to control the temperature of the reactants with the help of heating or cooling media circulated through coils surrounding the main vessel. Ideally suitable for medium heat transfer requirement and heating application where heating media temperature is above 150 Centigrade (302 Fahrenheit). Coils are half piped welded on the outer side of the main vessel.

  • A vertical shell where the separation of liquid components is carried out
  • Column internals such as trays/plates and/or packing’s which are used to enhance component separations
  • A reboiler to provide the necessary vaporisation for the distillation process
  • A condenser to cool and condense the vapour leaving the top of the column
  • A reflux drum to hold the condensed vapour from the top of the column so that liquid (reflux) can be recycled back to the column
  • The vertical shell houses the column internals and together with the condenser and reboiler, constitutes a distillation column.

we produce oxygen gas plants that are highly economical and require low maintenance and produce the desired results in a hassle-free manner. These generators absorb nitrogen with the help of two absorption vessels that are filled with most efficient zeolite molecular sieves responsible for nitrogen absorption. We are the manufacturer and exporter of PSA Oxygen Gas Plants.

In the Oxygen Gas Generation Process, the air is taken from an air compressor and oxygen is separated from other gases, including nitrogen with the help of zeolite molecular sieves. The process involves two towers filled with zeolite molecular sieves which adsorb nitrogen and subsequently discharge waste. When nitrogen saturates from one tower, this process changes over to the other tower, thus helping in the process of continuous oxygen generation.

  • Fully Automated System, touch screen with data logging
  • Oxygen generation plants are skid mounted modular designs, pre-piped and assembled, easy for transportation, compact in design and plug and play onsite.
  • Ready to use easy to go…!
  • Safety interlocks: over pressure, over temperature, oxygen purity etc. interlocks make sure that plant is working in safe conditions.
  • High Reliability: Very reliable for continuous and steady operation with constant Oxygen purity.
  • Our plants meets Worldwide Medical Oxygen Grade Standards
  • Cost Saving of up-to 80% from Liquid/Cylinder supply
  • Dependable Highest Reliability with Energy Efficiency
  • Easily Partial Load Operation in variable Demand Flows
  • Ready to use upon delivery
  • Easy to maintain with Continuously monitored Purity & Flow
  • Optional Cylinder filling Ramp with Emergency Disaster Recovery

*Considering standard 7m3 cylinder

** Figures not standard, considering min 3 L/min to max 10L/min average consumption of oxygen by one patient in 24 hours, flow rates may vary depending upon patient’s consumption and uses by plant owners.

*** Custom designs can be made upon request and demand

QUICK CONTACT

Office Address:

Plot No : 513/2/1, J Block, MIDC. Bhosari, Pune- 411026

Factory Address:

UNIT- 1 : Plot No : 513/2/1, J Block, MIDC. Bhosari, Pune- 411026

Facebook Twitter Linkedin

INDUSTRIES SERVED

PRODUCTS

SERVICES

Copyright © 2022 Pilon Engineering Pvt. Ltd. All rights reserved. | Powerd By Nia Webbrand.

Primary Responsibilities :
  1. 1.Making Drawing for Pressure Vessel, column, Heat Exchanger etc.
  2. 2.Making Dosing System Drawing as per client P &ID.
  3. 3.Having Experience in EPC Project
  4. 4.Designing of Manufacturing components, Assembly, GA drawing and assembly of project
Key Result Areas :
  1. 1.Work with multiple discipline projects
  2. 2.Managing and monitoring all assigned Projects
  3. 3.Site Engineering, Project Management
  4. 4.Documents Management
  5. 5.Subordinate and Senior Relations
  6. 6.Work within Time and Accuracy (No any complaints)
  7. 7.Discipline on Office (Proper Dress up, Appearance, Duty Timings, Communication)
Reporting to : Respective Line Manager
Primary Responsibilities :
  1. Preparation of Project Planning & Scheduling, Attending project Kick off meetings.
  2. One point contact to customer.
  3. Act as main coordination between Customer, Factory, and Supplier.
  4. Monitor the overall progress of projects against schedule and reporting to management.
  5. Maintain detailed project files and applicable records.
  6. coordinate the assigned project work during all project phases
  7. Manage budget, procurement and schedules for various projects.
  8. Provide approved documents along with manufacturing schedule based on the Commercial situation, inventory & time frame to the factory & supplier.
  9. Follow-up with supplier & factory for manufacturing status.
  10. Provide the project progress status to customer & management.
  11. Coordination of the inspection activity with factory, supplier, customer & TPI as per customer requirements
Key Result Areas :
  1. Work with multiple discipline projects
  2. Managing and monitoring all assigned Projects
  3. Site Engineering, Project Management
  4. Documents Management
  5. Subordinate and Senior Relations
  6. Work within Time and Accuracy (No any  complaints)
  7. Discipline on Office (Proper Dress-up, Appearance, Duty Timings, Communication)
Reporting to : Respective Line Manager
  • Having experience in EPC projects.
  • Having knowledge of exposure to pressure vessels, various types of process equipment, skid mounted systems is must.
  • Hould be able to prepare GA Drawings, Detailed fabrication drawings to support manufacturing .
  • Assembly of Shell & Tube Heat Exchangers, reactors, pressure vessels, skid, piping/ tubing etc
  • Should have experience of Preparation of Pipeline drawing – PFD / PID
  • Preparation of GAD/ layouts for projects.
  • Having experience in EPC projects.
  • Having knowledge of exposure to pressure vessels, various types of process equipment, skid mounted systems is must.
  • hould be able to prepare GA Drawings, Detailed fabrication drawings to support manufacturing .
  • Assembly of Shell & Tube Heat Exchangers, reactors, pressure vessels, skid, piping/ tubing etc
  • Should have experience of Preparation of Pipeline drawing – PFD / PID
  • Preparation of GAD/ layouts for projects.
  • Conducting product research and sourcing new suppliers and vendors.
  • Sourcing materials, goods, products, and services and negotiating the best or most cost-effective contracts and deals.
  • Performing inventory inspections and reordering supplies and stock as necessary.
  • Conducting market research to keep abreast of emerging trends and business opportunities.
  • Updating and maintaining records of all orders, payments, and received stock.
  • Excellent networking and time management skills.