• info@pilonengineering.com
  • sales@pilonengineering.com
  • Support@pilonengineering.com
Menu
  • info@pilonengineering.com
  • sales@pilonengineering.com
  • support@pilonengineering.com
Menu

High Pressure Distillation Set-up

Project: High Pressure Distillation Set-upDesigned for hassle free work experience for End-User

  1. The need for a High Pressure Distillation operation for the end user is fulfilled through this flawlessly designed set-up.
  2. The skid mounted system consists of the following:
  3. A batch reactor with capacity 5 liters, operating from Full vacuum to 55 bar and 250 Deg. C. Reactor is equipped with Internal cooling coil and an external ceramic band heater.
  4. The distillation column, filled with wire mesh regular structured packing, help in the distillation process.
  5. A condenser, to condense the vapor load from the reactor.
  6. Jacketed vessel for distillate collection.
  7. Weighing scale for measurement of the collected distillate.
  8. A unique feature of this system is the incorporation of a Lifting lowering arrangement to the reactor.
  9. This particular design is done to provide a hassle free work experience for the end-user.
  10. The Distillation column is designed to achieve a high degree of separation.
  11. To top it all, the system is fully automated with a touch screen HMI Panel, for ease of operation.
  • Mass flow Controller for feeding gas
  • Pump for liquid feed
  • Coriolis Mass flow Controller for feeding liquid
  • Feed Vessel with weighing scale
  1.  Consists of 1 L Hastelloy Reactor Designed at a temperature of
    300 Deg. C and Pressure of 100 Bar.
  2. Automatic Lifting Lowering arrangement
  3. Precise pressure Control to the reactor has been provided
  1. Gas Separation – Separated gases further passed to analysis section
  2. Liquid Separation – Separated liquid to product vessel
  3. Scrubber
  1. Product Vessel with Weighing Scale.
  2. Coriolis Mass Flow Controller for Precise flow control of product.
  1. Gas Analyzers for various gases such as CO2, CH4, CO, O2.
  2. Wet Gas Meter for Mass Balance.
  • Fully Automated system to carry out the process, with a control
    panel, SCADA based system.

QUICK CONTACT

Office Address:

Plot No : 513/2/1, J Block, MIDC. Bhosari, Pune- 411026

Factory Address:

UNIT- 1 : Plot No : 513/2/1, J Block, MIDC. Bhosari, Pune- 411026

Facebook Twitter Linkedin

INDUSTRIES SERVED

PRODUCTS

SERVICES

Copyright © 2022 Pilon Engineering Pvt. Ltd. All rights reserved. | Powerd By Nia Webbrand.

Primary Responsibilities :
  1. 1.Making Drawing for Pressure Vessel, column, Heat Exchanger etc.
  2. 2.Making Dosing System Drawing as per client P &ID.
  3. 3.Having Experience in EPC Project
  4. 4.Designing of Manufacturing components, Assembly, GA drawing and assembly of project
Key Result Areas :
  1. 1.Work with multiple discipline projects
  2. 2.Managing and monitoring all assigned Projects
  3. 3.Site Engineering, Project Management
  4. 4.Documents Management
  5. 5.Subordinate and Senior Relations
  6. 6.Work within Time and Accuracy (No any complaints)
  7. 7.Discipline on Office (Proper Dress up, Appearance, Duty Timings, Communication)
Reporting to : Respective Line Manager
Primary Responsibilities :
  1. Preparation of Project Planning & Scheduling, Attending project Kick off meetings.
  2. One point contact to customer.
  3. Act as main coordination between Customer, Factory, and Supplier.
  4. Monitor the overall progress of projects against schedule and reporting to management.
  5. Maintain detailed project files and applicable records.
  6. coordinate the assigned project work during all project phases
  7. Manage budget, procurement and schedules for various projects.
  8. Provide approved documents along with manufacturing schedule based on the Commercial situation, inventory & time frame to the factory & supplier.
  9. Follow-up with supplier & factory for manufacturing status.
  10. Provide the project progress status to customer & management.
  11. Coordination of the inspection activity with factory, supplier, customer & TPI as per customer requirements
Key Result Areas :
  1. Work with multiple discipline projects
  2. Managing and monitoring all assigned Projects
  3. Site Engineering, Project Management
  4. Documents Management
  5. Subordinate and Senior Relations
  6. Work within Time and Accuracy (No any  complaints)
  7. Discipline on Office (Proper Dress-up, Appearance, Duty Timings, Communication)
Reporting to : Respective Line Manager
  • Having experience in EPC projects.
  • Having knowledge of exposure to pressure vessels, various types of process equipment, skid mounted systems is must.
  • Hould be able to prepare GA Drawings, Detailed fabrication drawings to support manufacturing .
  • Assembly of Shell & Tube Heat Exchangers, reactors, pressure vessels, skid, piping/ tubing etc
  • Should have experience of Preparation of Pipeline drawing – PFD / PID
  • Preparation of GAD/ layouts for projects.
  • Having experience in EPC projects.
  • Having knowledge of exposure to pressure vessels, various types of process equipment, skid mounted systems is must.
  • hould be able to prepare GA Drawings, Detailed fabrication drawings to support manufacturing .
  • Assembly of Shell & Tube Heat Exchangers, reactors, pressure vessels, skid, piping/ tubing etc
  • Should have experience of Preparation of Pipeline drawing – PFD / PID
  • Preparation of GAD/ layouts for projects.
  • Conducting product research and sourcing new suppliers and vendors.
  • Sourcing materials, goods, products, and services and negotiating the best or most cost-effective contracts and deals.
  • Performing inventory inspections and reordering supplies and stock as necessary.
  • Conducting market research to keep abreast of emerging trends and business opportunities.
  • Updating and maintaining records of all orders, payments, and received stock.
  • Excellent networking and time management skills.